Mobi Care Emulsion
Mobi Care Emulsion Paint is a premium solution that adds a touch of elegance and durability to interior walls. With its smooth application and wide range of vibrant colors, Mobi Care Emulsion Paint transforms any space into a visually stunning and long-lasting environment.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER
DILUTION
Water
DRYING TIME
1-2 Hours
RECOAT TIME
AT AN INTERVAL OF 3-4 HOURS
COVERAGE
120-140 SQ.FT/L/CT
SHADE
ALL COLORS FROM SHADE CARD
PACKAGING
0.91 LTR, 14.56 LTR
No color shades found for this product.
SURFACE PREPARATION:
Surfaces must be clean, dry, free from masonry salts. Remove all defective or poorly adhering materials by rubbing down using a suitable abrasive paper or stiff brush. Treat any area affected by mould, lichens, algae or moss with bleach. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dust off.
Filling New Surfaces:
After priming new surfaces with MOBI Interior Water Base Primer / MOBI Oil Base Primer, fill the surface with Mobi Fine Filler/Wall Putty/Care Putty. Please refer to TDS of MOBI Interior Water Base Primer / MOBI Oil Base Primer & Mobi Fine Filler/Wall Putty/Care Putty for correct application procedure and drying time properties.
Powdery, Dusty Surfaces, Defects, Cracks & Other Surfaces:
Repair minor defects. For large holes & cracks use sand and cement mixture. Allow to dry. Prime the surface with Water Base Primer / MOBI Oil Base Primer and then fill any surface imperfections with the Mobi Fine Filler/Wall Putty/Care Putty. Scuff the surface using suitable abrasive paper and dust off
| TECHNICAL DATA | |
|---|---|
| Composition (Nominal) | |
| Pigment | Non Lead Pigment |
| Binder | PVA Co-Polymer |
| Solvent | Water |
| Volume solids | 65 ± 5 % |
| Colors | All Colors from shade card. |
| Film Thickness | Not Applicable |
| Pack Viscosity | 22 – 32 Poise |
| No of Coats | 2 – 3 Coats |
| Specific Gravity | 1.50 – 1.62 (Depending Upon Colors) |
| No of Coats | 2 – 3 Coats |
| Drying Time at 25°C | 1–2 Hours |
| Recoat at 25°C | 3–4 Hours |
| Practical Coverage | A guide to the practical coverage which can be achieved under normal condition is 120–140 Square foot /liter/coat. |
TDSRelated Products
Mobi CR Road Line Marking
This product has multiple variants. The options may be chosen on the product page