Mobi Fine Filler
Mobi Fine Filler Price range: ₨ 424 through ₨ 4,316
Back to products

Mobi Wall Putty

MOBI WALL PUTTY (water based) is a ready to use filler. It gives a smooth and brilliant white base by filling the pores. It is easy to apply and quick in drying. Its excellent filling properties give a smooth finish for topcoat application. MOBI Wall Putty is recommended to use only on interior surfaces.

Price range: ₨ 1,084 through ₨ 3,883

PRODUCT INFORMATION

METHOD OF APPLICATION

Scraper or Putty Applicator

DILUTION

Water

DRYING TIME

2-3 Hours

RECOAT TIME

AT AN INTERVAL OF 4-6 HOURS

COVERAGE

40-50 SQ.FT/KG/CT

SHADE

N/A

PACKAGING

5 KG, 20 KG

No color shades found for this product.

SURFACE PREPARATION:
Allow all new surfaces to dry out completely. Surface must be clean, dry & free of all masonry salts .Remove all
defective or poorly adhering materials by rubbing down using a suitable abrasive paper or stiff brush. Treat any area affected by mould, lichens, algae or moss with bleach. Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dust off.
New Surfaces:
Prime new surfaces with 1 coat of MOBI Interior Water Base Primer / MOBI Oil Base Primer. Please refer to TDS of MOBI Interior Water Base Primer / MOBI Oil Base Primer for correct application procedure and drying time properties.

Powdery, Dusty Surfaces, Defects, Cracks & Other Surfaces:
Repair minor defects. For large holes & cracks use sand and cement mixture. Allow to dry. Prime the surface with MOBI Interior Water Base Primer / MOBI Oil Base Primer before applying MOBI Wall Putty.

 

TECHNICAL DATA
Composition (Nominal)
Pigment Non Lead Pigment
Binder PVA Co-Polymer
Solvent Water
Ph 8.5 – 9.5
Colors N/A
Gel Strength 160-180 GM/CM3 @30C
Drying Time at 25°C 2–3 Hours
Recoat at 25°C 4–6 Hours
Practical Coverage A guide to the practical coverage which can be achieved under normal condition is
40–50 Square foot /liter/coat.