MAIN USES: Used as sealer coat on walls,ceilings and all other masonry surfaces as wood sealer on wooden surfaces before applying Plastic Emulsion, Weather Save, Super Emulsion,Washable Matt Finish or Super gloss Enamel. It provides maximum protection to emulsion and enamel paints applied over it.
COVERING CAPACITY: 8 – 12 m2 / Litre per coat
DRYING TIME: Surface Dry: 2-3 hours, Hard Dry: 16 hours, Recoatable: 24 hours (Depending on the Humidity & Temperature)
PACKING: 3.64 Litres, 0.91 Litre
Ensure the surface is fully dried & free from powdery material which can be achieved by rubbing with abrasive paper followed by the removal of loose dust with solvent soaked cloth. When completely dry apply one coat of MOBI Undercoat and let it dry for 24 hours.
Thin MOBI Undercoat with 10-15% good quality white spirit. Apply one coat and let it dry for 24 hour s. Filling if required should be done with putti. Let it dry before applying Special Plastic Emulsion, Weather Resist, Enamel or Matt Finish.
TIPS FOR SAFETY, ECONOMY AND ENVIRONMENTAL PROTECTION
Keep the paint away from sources of ignition and avoid smoking. Where the painting is in progress ensure adequate ventilation. Do not breathe vapours,use of suitable respiratory equipment is highly recommended.
Keep paint container air tight after use and store in a shady & dry place. To save the unused paint for longer period of time,replace the lid firmly and invert the can for few seconds to se al the lid. Rinse with plenty of water in case of eye contact and seek medical advice. Use white spirit,turpentine oil or skin cleanser to remove Paint from skin.
Scrape excess paint out of brushes and rollers before cleaning. Wash all equipment immediately after use with white spirit or turpentine oil. Shake excess liquid out after washing and then wrap them in a piece of clean cloth. Doing so will revive your brushes back to original. Do not dispose-off excess paint in accordance with the environmental regulations.