New
Mobi Synthetic Varnish
Price range: ₨ 363 through ₨ 3,303
Mobi 2K Pure Coat
Price range: ₨ 790 through ₨ 1,130
Mobi PU Elfi Varnish (Gloss & Matt)
MOBI PU Clear Varnish is PU modified alkyd based, pigment free clear varnish, which gives a luxurious gloss finish and is suitable for all types of interior & exterior wood and metal surfaces. It provides ultimate protection and durability to Wood and metal surfaces. It is designed to produce a flexible and clear film to protect the substrate against environmental concerns such as ultraviolet light, dirt and moisture. The cured coating is resistant to polymer degradation and yellowing.
Price range: ₨ 1,211 through ₨ 1,331
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER & SPRAY
DILUTION
MTT, Kerosene Oil, White Spirit
DRYING TIME
5-6 Hours
RECOAT TIME
AT AN INTERVAL OF 16 HOURS
COVERAGE
140-170 SQ.FT/L/CT
SHADE
Transparent
PACKAGING
0.75 LTR
No color shades found for this product.
SURFACE PREPARATION:
Surfaces must be free from dust, dirt, grease, oil, heavy shoot or chalk. Remove all defective or poorly adhering
materials by rubbing down using a suitable abrasive paper or stiff brush.
Metal Surface:
After priming new surfaces with MOBI Red Oxide Primer or Wash primer for nonferrous surface, fill the surface where required with Steel Putty. Please refer to TDS of Mobi Red Oxide Primer for correct application procedure and drying time properties.
Wooden Surface:
Scuff of the surface with suitable abrasive paper than prime the surface with MOBI Undercoat White and then fill any surface imperfections with Putty. Scuff the surface using suitable abrasive paper and dust off.
| TECHNICAL DATA | |
|---|---|
| Composition (Nominal) | |
| Pigment | Non Lead Pigment |
| Binder | Alkyd |
| Solvent | MTT, Kerosene Oil, White Spirit |
| Volume solids | 50 ± 10 % |
| Colors | Transparent |
| Film Thickness | Dry : 35 ± 5 microns. |
| Pack Viscosity | 18 – 22 Poise |
| Specific Gravity | 1.36 ± 0.1 Depending upon colors |
| Gloss | Maximum 10 Gu |
| Drying Time at 25°C | 5–6 Hours |
| Recoat at 25°C | 16 Hours |
| Practical Coverage | A guide to the practical coverage which can be achieved under normal condition is 140–170 Square foot /liter/coat. |
TDS MattRelated Products
Mobi Heat Resistant Coating Upto 450°C
High Heat Resistant Coating (up to 450°C) is a premium, solvent-based, heat-resistant protective coating specially formulated to withstand continuous thermal exposure up to 450°C. Engineered using high-temperature silicone resins and heat-stable pigments, it provides excellent adhesion, corrosion resistance, and long-term durability in high-heat industrial environments.
This coating forms a tough, thermally stable film that resists degradation, discoloration, and oxidation, making it suitable for surfaces exposed to frequent and prolonged heating cycles.
Mobi CR Thinner
Price range: ₨ 600 through ₨ 2,000
Select options
This product has multiple variants. The options may be chosen on the product page
Mobi CR Thinner is a specially formulated solvent blend designed for thinning chlorinated rubber (CR)-based coatings, primers, and adhesives. It optimizes the application properties of CR systems by reducing viscosity, enhancing flow and leveling, and ensuring a uniform finish. It is also suitable for cleaning tools and equipment used in the application of CR-based products.
Mobi CR Road Line Marking
Price range: ₨ 2,900 through ₨ 17,800
Select options
This product has multiple variants. The options may be chosen on the product page
Mobi CR road line marking is single pack fast drying coating based on a durable alkyd modified chlorinated rubber base resin. It may be applied to concrete and bitumen surfaces without bleeding or discoloration, providing clean lines of high visibility. It is recommended for making roadways, car parks and pavements.
Mobi Polyurethane Thinner
Mobi Polyurethane Thinner is a premium-grade solvent specially formulated to dilute and adjust the viscosity of 2-component polyurethane primers, topcoats, and clear coats. It ensures smooth application, enhanced flow, and optimal leveling of polyurethane-based coatings. This thinner is also suitable for cleaning application tools and equipment used with polyurethane systems.
Mobi Polyurethane Top Coat Matt
Mobi Two-Pack Polyurethane Topcoat is a premium, colour-stable coating designed for superior protection and aesthetic appeal. This Luxurious Matt polyurethane finish delivers outstanding water, salt, and corrosion resistance, making it ideal for harsh environments.The cured dry film offers excellent adhesion to a wide range of surfaces, along with exceptional flexibility and impact resistance. Engineered for durability, this topcoat performs reliably in both interior and exterior applications, including marine and coastal conditions, thanks to its excellent UV resistance.
Mobi 3D Epoxy Clear
Mobi 3D Epoxy Clear is a high-quality, crystal-clear epoxy system specially formulated for epoxy art, 3D flooring, river tables, tabletops, countertops, and decorative casting. With excellent flow, leveling, and self-degassing properties, it delivers a smooth, glass-like surface with high durability and aesthetic brilliance.