New
Mobi Polyurethane Top Coat Gloss
Mobi Two-Pack Polyurethane Topcoat is a premium, colour-stable coating designed for superior protection and aesthetic appeal. This high-gloss polyurethane finish delivers outstanding water, salt, and corrosion resistance, making it ideal for harsh environments.The cured dry film offers excellent adhesion to a wide range of surfaces, along with exceptional flexibility and impact resistance. Engineered for durability, this topcoat performs reliably in both interior and exterior applications, including marine and coastal conditions, thanks to its excellent UV resistance.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER & SPRAY
DILUTION
WATER
DRYING TIME
5-6 Hours
RECOAT TIME
AT AN INTERVAL OF 16 HOURS
COVERAGE
140-170 SQ.FT/L/CT
SHADE
NOT AVAILABLE
PACKAGING
1.5 LTR, 6 LTR
No color shades found for this product.
SURFACE PREPARATION:
Surfaces must be free from dust, dirt, grease, oil, heavy shoot or chalk. Remove all defective or poorly adhering
materials by rubbing down using a suitable abrasive paper or stiff brush.
Metal Surface:
After priming new surfaces with MOBI Red Oxide Primer or Wash primer for nonferrous surface, fill the surface where required with Steel Putty. Please refer to TDS of Mobi Red Oxide Primer for correct application procedure and drying time properties.
Wooden Surface:
Scuff of the surface with suitable abrasive paper than prime the surface with MOBI Undercoat White and then fill any surface imperfections with Putty. Scuff the surface using suitable abrasive paper and dust off.
| TECHNICAL DATA | |
|---|---|
| Composition (Nominal) | |
| Pigment | Non Lead Pigment |
| Binder | Alkyd |
| Solvent | MTT, Kerosene Oil, White Spirit |
| Volume solids | 50 ± 10 % |
| Colors | All Colors from shade card. |
| Film Thickness | Dry : 35 ± 5 microns. |
| Pack Viscosity | 18 – 22 Poise |
| Specific Gravity | 1.36 ± 0.1 Depending upon colors |
| Gloss | Maximum 10 Gu |
| Drying Time at 25°C | 5–6 Hours |
| Recoat at 25°C | 16 Hours |
| Practical Coverage | A guide to the practical coverage which can be achieved under normal condition is 140–170 Square foot /liter/coat. |
Related Products
Mobi NC Putty
Price range: ₨ 720 through ₨ 2,750
Select options
This product has multiple variants. The options may be chosen on the product page
Mobi NC Primer Grey is a premium-quality nitrocellulose-based primer formulated to deliver excellent adhesion, fast drying, and superior sandability on a variety of surfaces including wood, metal, and automotive panels. Its high-opacity grey finish offers outstanding coverage and serves as an ideal basecoat for enamel, lacquer, or polyurethane topcoats.
Mobi Heat Resistant Coating Upto 450°C
High Heat Resistant Coating (up to 450°C) is a premium, solvent-based, heat-resistant protective coating specially formulated to withstand continuous thermal exposure up to 450°C. Engineered using high-temperature silicone resins and heat-stable pigments, it provides excellent adhesion, corrosion resistance, and long-term durability in high-heat industrial environments.
This coating forms a tough, thermally stable film that resists degradation, discoloration, and oxidation, making it suitable for surfaces exposed to frequent and prolonged heating cycles.
Mobi CR Roof Coating White
Price range: ₨ 3,375 through ₨ 17,800
Select options
This product has multiple variants. The options may be chosen on the product page
Mobi CR Roof Coating White is a high-performance, white chlorinated rubber (CR)-based roof coating formulated for long-lasting waterproofing and thermal protection. This elastomeric coating provides excellent adhesion, flexibility, and weather resistance, forming a seamless, UV-resistant membrane that reflects heat and protects roofing substrates from water ingress and environmental damage. It is ideal for both flat and sloped roofs made of concrete, metal, or asphalt.
Mobi Self Leveling Epoxy 2mm
Mobi Self Leveling floor coating System is based on three-component epoxy resins system. Mobi Hi Build Self Leveling floor coating System is designed especially for floors. It provides a smooth and easy to clean surface which is resistant to dirt, moisture, oil, light-medium abrasion and chemical attack.
Mobi Solvent Free Epoxy 0.5mm
Mobi Solvent Free Epoxy 0.5mm is a 2 Component, solvent-free epoxy floor. It has a 0.5 mm self-leveling layer for light traffic. Its seamless and dense surface provides strength and durability. also, It resists mild chemicals and blocks moisture. Additionally, it is hygienic and easy to clean. This makes maintenance simple and hassle-free.