New
Mobi Heat Resistant Coating Upto 650°C OR 1200°F
High Heat Resistant Coating – 650°C OR 1200°F( Silver) is a single-component, silicone-based coating specially formulated to withstand continuous exposure to temperatures up to 650°C OR 1200°F. Reinforced with heat-stable aluminum pigments, it forms a durable, reflective, and corrosion-resistant film ideal for protecting metal surfaces in extreme thermal environments. This coating delivers exceptional resistance to oxidation, thermal shock, and discoloration, making it ideal for industrial applications involving high and sustained heat.
PRODUCT INFORMATION
METHOD OF APPLICATION
BRUSH, ROLLER & SPRAY
DILUTION
WATER
DRYING TIME
5-6 Hours
RECOAT TIME
AT AN INTERVAL OF 16 HOURS
COVERAGE
140-170 SQ.FT/L/CT
SHADE
NOT AVAILABLE
PACKAGING
4 LTR, 1 LTR
No color shades found for this product.
SURFACE PREPARATION:
Surfaces must be free from dust, dirt, grease, oil, heavy shoot or chalk. Remove all defective or poorly adhering
materials by rubbing down using a suitable abrasive paper or stiff brush.
Metal Surface:
After priming new surfaces with MOBI Red Oxide Primer or Wash primer for nonferrous surface, fill the surface where required with Steel Putty. Please refer to TDS of Mobi Red Oxide Primer for correct application procedure and drying time properties.
Wooden Surface:
Scuff of the surface with suitable abrasive paper than prime the surface with MOBI Undercoat White and then fill any surface imperfections with Putty. Scuff the surface using suitable abrasive paper and dust off.
| TECHNICAL DATA | |
|---|---|
| Composition (Nominal) | |
| Pigment | Non Lead Pigment |
| Binder | Alkyd |
| Solvent | MTT, Kerosene Oil, White Spirit |
| Volume solids | 50 ± 10 % |
| Colors | All Colors from shade card. |
| Film Thickness | Dry : 35 ± 5 microns. |
| Pack Viscosity | 18 – 22 Poise |
| Specific Gravity | 1.36 ± 0.1 Depending upon colors |
| Gloss | Maximum 10 Gu |
| Drying Time at 25°C | 5–6 Hours |
| Recoat at 25°C | 16 Hours |
| Practical Coverage | A guide to the practical coverage which can be achieved under normal condition is 140–170 Square foot /liter/coat. |
Related Products
Mobi CR Thinner
Price range: ₨ 600 through ₨ 2,000
Select options
This product has multiple variants. The options may be chosen on the product page
Mobi CR Thinner is a specially formulated solvent blend designed for thinning chlorinated rubber (CR)-based coatings, primers, and adhesives. It optimizes the application properties of CR systems by reducing viscosity, enhancing flow and leveling, and ensuring a uniform finish. It is also suitable for cleaning tools and equipment used in the application of CR-based products.
Mobi CR Primer Clear
Price range: ₨ 4,600 through ₨ 25,000
Select options
This product has multiple variants. The options may be chosen on the product page
Mobi CR Primer is a high-quality chlorinated rubber (CR) based primer formulated to enhance the adhesion of CR-based coatings systems to concrete or asphalt surfaces. It penetrates and seals porous substrates, promoting strong mechanical bonding and long-term durability of the coating system. Ideal for outdoor and indoor sports flooring applications, this primer ensures consistent performance under heavy use and varying weather conditions.
Mobi Polyurethane Thinner
Mobi Polyurethane Thinner is a premium-grade solvent specially formulated to dilute and adjust the viscosity of 2-component polyurethane primers, topcoats, and clear coats. It ensures smooth application, enhanced flow, and optimal leveling of polyurethane-based coatings. This thinner is also suitable for cleaning application tools and equipment used with polyurethane systems.
Mobi Self Leveling Epoxy 2mm
Mobi Self Leveling floor coating System is based on three-component epoxy resins system. Mobi Hi Build Self Leveling floor coating System is designed especially for floors. It provides a smooth and easy to clean surface which is resistant to dirt, moisture, oil, light-medium abrasion and chemical attack.